2949 TechGrow, 12721, Clima Control 14A (excl. Temp/RH sensor)

Clima Control

The Clima Control is a digitally controlled climate controller,
with the option to connect 2 fans.

You can read all current values ​​at a glance on the digital display.
Depending on the connected sensor(s), the Clima Control can measure the values ​​and register the
min/max values ​​of CO₂, temperature and humidity.

Thanks to the modern software, it can also regulate the temperature and humidity in your room very accurately, with day and night values ​​being separately adjustable.
You can also set a delay time for switching between day and night mode.
The clear menu makes the controller very easy to operate.

With the unique calibration function, you can adjust the fan perfectly and have it work in manual or automatic mode.

Do you want the temperature measurement to run in sync with your other measuring equipment?
That is also possible with the handy “temp offset” function.

The Clima Control is supplied without a TEMP/RH sensor.

Features:
• The Clima Control can measure and display the current values ​​of connected CO₂, humidity and temperature sensors, record the min/max values ​​and control the value (Temp & RH).
• Day and night temperature can be set separately.
• Humidity value can be set separately for day and night.
• Delay time for switching between day and night mode.
• Indicator LEDs turn on when light is detected and the climate is stable.
• All settings are saved in the event of a power failure.
• Shows the minimum/maximum values ​​of connected sensors in the display.
• The display is refreshed every second.
• The fan can be operated automatically or manually.
• The fan control can be set in steps of 2%.
• Unique function that allows the fan to be set in 2 simple steps.
• Calibration menu for adjusting each fan, regardless of the format.
• Automatic switch-off of the display backlight after 60 seconds.
• Automatic detection of cable breakage or poor contact with the connected sensors.
• Connect the sensor with standard UTP (CAT 6) network cable.
• Can be connected to many TechGrow devices.
• Various sensors are available separately.
• Available in: 14A

Technical specifications:
• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7A/1700W, 14A/3400W
• TEMP setting range: 10.0 to 45.0°C
• TEMP hysteresis setting range: +/- 5.0°C
• TEMP offset setting range: +/- 5.0°C
• RH setting range: 11% - 100% / Off
• RH hysteresis setting range: +/- 30%